1. Regular cleaning. First of all, it is necessary to clean up the sawdust and various wood debris generated in the production process of the edge banding machine to prevent the machine from being blocked due to the accumulation of wood, which will affect the normal use of the Small edge banding machine. Secondly, it is necessary to clean up some stains on the surface of the machine in time, keep the edge banding machine clean and tidy, and at the same time prevent harmful substances from causing corrosion and damage to the surface of the edge banding machine.

      2. Lubricate the Small edge banding machine regularly. The bearings of each part of the edge banding machine should be regularly added with lubricating oil, and appropriate lubricants should be selected, otherwise the normal use of the edge banding machine will be affected.

      3. Regular inspection. Regular inspection and maintenance of edge banding machines. During the maintenance process, carefully check the wear of the gears, bearings and other parts of the edge banding machine, and replace the severely worn parts in time.

      Fourth, the edge banding machine computer system maintenance. Most of the current edge banding machines are connected to the computer, so as to realize the automatic operation of computer programming. If there is a problem with the computer system, it will also affect the normal use of the machine.

Edge banding machine rails should be cleaned every 40 hours. Add No. 46 guide oil to the sliding surface of the edge banding machine or the oil hole of the edge banding machine! The edge-sealing oil-water separator and edge-sealing oil cup should be filled with low-viscosity air compressor oil to two-thirds of the oil cup, and the main drive motor of the edge-sealing machine should be checked every two months. The transmission gear under the rubber box of the edge banding machine should be checked and cleaned every 40 hours, and high-viscosity grease should be added.